fbpx

Laser-guided auto-steer system for Fendt 200

07-10-2019 | |
Laser-guided auto-steer system for Fendt 200
Laser-guided auto-steer system for Fendt 200

Fendt will show a laser-guided auto-steer system for the Fendt 200 V/F Vario at Agritechnica.

At Agritechnica 2019 and together with Braun Maschinenbau GmbH, Fendt will unveil a all-in-one system that aims to make it much easier to drive equipment combinations (especially with intermediate axle attachments), increase the quality of work and enables complex combinations that were previously not navigable.

Auto-steering

The system takes control of the tractor implement combination and allows the tractor to be automatically steered as well as automatically and constantly adapting the equipment to the environment.

“This increases the appeal of mechanical weed control in the substrate, but also increases the efficiency of the substrate and mulch work,” says Fendt.

Fendt 200 V/F Vario

The entire system is based on a Fendt 200 V/F Vario, which houses a Braun intermediate axle frame with two-sided vertical lift and various implements. At the rear is a mulcher, also from Braun.

The Braun VPA (Vineyard Pilot Assistant) system collects and passes on the steering data. The system consists of a laser, a gyroscope, the VPA control unit and a terminal.

Laser scans the environment

The laser scans the environment and detects the soil contour, vines and stakes, among other things. The gyroscope, a rapidly rotating gyro that rotates in a moving bearing, picks up the tractor’s 3D position. The information from the VPA system is sent to the Fendt 200 V/F Vario via the ISOBUS interface. The tractor performs the steering commands and automatically drives exactly in the middle of the vine row.

Text continues underneath image

The entire system is based on a Fendt 200 V/F Vario, which houses a Braun intermediate axle frame with two-sided vertical lift and various implements. At the rear is a mulcher, also from Braun. - Photos: Fendt

The entire system is based on a Fendt 200 V/F Vario, which houses a Braun intermediate axle frame with two-sided vertical lift and various implements. At the rear is a mulcher, also from Braun. – Photos: Fendt

This communication between Braun’s steering system and the narrow gauge tractor works exclusively with the Fendt 200 V/F Vario. The information is also sent to the intermediate axle implements which are then independently controlled in height and width. The implements work at an ideal distance from the vines, which improves the quality of work and minimises damage.

System activated at the beginning of the row

The implement attached to the rear is adjusted in its width according to the scanned information. The system is activated at the beginning of the row, when the intermediate axle implements automatically take up their ideal working position.

According to Fendt, This is also a safety feature, so that the implements do not enter their working position unintentionally. Using row-end recognition, the intermediate axle implements automatically go into park position at the end of the row.

With this system, active intervention by the driver is only needed at the headland. In the vine row, all the driver has to do is control the system.

Text continues underneath image

The system is activated at the beginning of the row, when the intermediate axle implements automatically take up their ideal working position.

The system is activated at the beginning of the row, when the intermediate axle implements automatically take up their ideal working position.

Twice as fast

Fendt says the machine also drives almost twice as fast compared to journeys without the system – at around 8 km/h. The lower number of cross-overs not only saves time and resources, but also compacts the ground less. The components of the implement combination can also be used individually or in other combinations. An intermediate axle can be used with an attached sprayer, for example.

Fendt and Braun Maschinenbau will be awarded with an Innovation Award at Agritechnica for their auto-steer system.

Join 17,000+ subscribers

Subscribe to our newsletter to stay updated about all the need-to-know content in the agricultural sector, two times a week.

Claver
Hugo Claver Web editor for Future Farming





Beheer